- LinAzman
- Posts : 3
Join date : 2017-03-09
HP Color Laserjet CP3525n 68.0 Permanent Storage Write Fail Error.
Thu Mar 09, 2017 3:09 am
Customer: TM-MINDEF
Description
The NVRAM storage device is failing to write.
Action
Description
The NVRAM storage device is failing to write.
Action
- Press (Select) to clear the message and continue.
- If unexpected behavior occurs, turn the printer off then turn the printer back on again.
- If the error persists, execute NVRAM initialization.
- Before initializing NVRAM, print a Configuration page and a supplies status page.
- To initialize NVRAM do the following:
- Turn the printer on and watch the control panel display.
- When the display begins showing the memory count, press and hold (Down Arrow) until all three lights on the control panel are lit.
- Press (Up Arrow).
- Press PAUSE/RESUME . The display should show SKIP DISK LOAD .
- Press (Up Arrow) until NVRAM INIT is highlighted.
- Press (Select). The printer will initialize NVRAM and then continue its power-on sequence.
Permissions in this forum:
You cannot reply to topics in this forum